Introducing UPOL B Glass Fibre Bridging Compound Filler 1.1L
UPOL B is a strong polyester glass fibre filler that can be easily shaped and sanded once cured. Suitable for bridging holes and rust in steel and GRP surfaces. Ideal for bridging holes in panel damage.
Key Features:
- Excellent gap filling properties
- Water resistant when fully cured
- Easy to cover with standard polyester filler
Application:
- Tools required:Onion Board Mixing Pallet, U-POL Applicator, SYSTEM 20 Degreasers, MAXIMUM Premium Masks, MAXIMUM Painters Overalls, MAXIMUM Abrasives, GUIDE #7 Guide Coat Aerosol
- U-POL B FIBREGLASS BRIDGING COMPOUND has superb adhesion to all the substrates above.
- For best results, good preparation is essential.
- Clean and degrease removing dirt, oil, grease and wax using cleaning solutions such as U-POL’s SYSTEM 20 Degreasers.
- Abrade with grit paper as stated above for each respective substrate.
- Re-clean, dry and degrease the abraded substrate ready for application.
- Mix thoroughly on an Onion Board Mixing Palette.
- Follow mix ratio carefully. Do not under or over catalyse.
- Apply with a pressing action to reduce air entrapment. Not recommended for applications below 5C.
Technical Specifications:
- Size: 1L tin
- Colour: Yellow
- Manufacturer Part Number: UPOLB/2
Official product information sheet
Reviews
There are no reviews yet.