Introducing Osccar Repair Kit Fibreglass Mat Polyester 250g
Osccar Repair Kit is a quick-drying polyester resin filler with a mat glass cloth. Ideal for repairing large damages (caused by corrosion) in car bodies. As well as for laminating yachts, boats and caravans.
The repair kit contains additives, which cause the reduction of styrene emission while and after application. The additives forms a rigid laminate with a very good mechanical strength. Suitable for car body repairs, construction and repair of vessels, elements of garden architecture, etc.
Want to know more about this product from Osccar? Click Here.
Key Features
- Quick-drying polyester resin filters excellent the mat and glass cloth
- Thixotropic, easy application
- Repair Kit contains additives, which cause the reduction of styrene emission while and after application
- The additives becomes hardened laminate showing no sticky surface after drying (particularly important when machining with abrasive materials)
- Excellent adhesion to steel surfaces
- For car body repairs, construction and repair of vessels, elements of garden architecture, etc.
Application:
- The repaired surface must be precisely cleaned of remained paint with abrasives P40 – P80 and degreased with silicone remover. Thoroughly mix resin (A) with Hardener (B) in proportions: 100 g of resin + 2-3 g of BPO hardener. Apply mixture with a brush on repaired element, then put glass mat cut to the required size, so that it covers about 5 cm of an undamaged area.
- Glass mat soak in mix (A+B) until full oversaturation of the mat and removing air bubbles by pressing resin in the mat with stiff brush. Gel time 10 minutes at 20oC. When the laminate temperature (resin + mat) will be close to the ambient temperature, the surface can be smoothed and tarnished with P80 – P120, and possible unevennesses are to be filled with filling and finishing putties.
- When using polyester resin in repairs, must be ensured the correct proportion of resin to glass in each coat. For 1 kg of glass mat use 1,5 – 2 kg of resin. The break between application of another coat should not exceed 48 hours. Otherwise, laminate’s surface should be regrinded, because laminate may delaminate. Resin storage longer than 12 months or in not appropriate conditions can cause de-lamination.
- When cured, the area may be sanded down and coated with any polyester putties, to achieve a smooth surface.
Technical Specifications:
- Shelf-life: 12 months
- Density: 1,1 – 1,2 g/cm3
- Colour: light brown
- VOC content: 2004/42/IIB(b)(250) <250
- Manufacturer Part Number: 26117
Reviews
There are no reviews yet.